Granularity refers to the size of silicon metal particles, a parameter crucial for both the applications and processing of the metal silicon, also known as crystalline silicon or industrial silicon, primarily used as an additive in non-ferrous alloys. In its production process, granularity is a significant process factor, influenced by various factors including the type of silica, furnace capacity, operating conditions, type, and granularity of reducing agents, among others.



The granularity of metal silicon needs to be determined according to specific requirements
- In the solar energy industry, controlling the granularity of metal silicon within the range of 50-120mm is essential to avoid poor permeability of the charge material, where unreacted silica settles at the bottom of the furnace or enters the silicon melt, causing an increase in silicon melt. This reduces slag content and consequently lowers energy consumption.
- In aluminum alloy enterprises, due to the constraints of smelting furnaces and processes, there are specific granularity requirements for silicon blocks, generally ranging from 10 to 100mm. This is also a typical granularity requirement.
During the processing of metal silicon powder, different granularities of metal silicon powder are produced according to different production processes and requirements
- The granularity of metal silicon powder is usually between 10-100μm. Special specifications of metal silicon powder can be customized according to customer requirements, reaching 45-325 mesh, with an average particle size of 120-200μm.
- For applications requiring high precision, finer granularities such as 1μm or smaller can be chosen; for situations with less stringent granularity requirements, larger granularities can be selected, for example, -200 mesh or larger.
Therefore, the commonly used granularity range of metal silicon powder varies according to different application requirements.
National standards also specify granularity requirements for industrial silicon, with each batch of industrial silicon requiring granularity inspection. This indicates that the granularity of metal silicon is not only related to its application effects in specific industries but also subject to national regulations.
In summary, the granularity of metal silicon can be adjusted according to specific application requirements and production conditions, ranging from extremely fine powder (such as 100 mesh, 325 mesh) to larger block-like substances (such as 6-20mm). This wide granularity range enables metal silicon to meet the needs of different industries and processes.
The selection and control of metal silicon granularity are complex processes, requiring comprehensive consideration of production conditions, application requirements, and national standards. Through reasonable granularity control, the utilization efficiency of metal silicon can be optimized, enhancing product quality and production efficiency.
HS can produce different grades of industrial silicon. At the same time, there are also different categories and different particle sizes of silicon metal powder. And support the customization of silicon metal blocks, silicon metal particles and silicon metal powder products according to customer needs.



