A Leading Ferro Alloy Manufacturer

Innovative Electrolytic Method for Efficient Production of High-Purity Calcium Silicon Alloy (CaSi1)

Home » News » Innovative Electrolytic Method for Efficient Production of High-Purity Calcium Silicon Alloy (CaSi1)

Share

Silicon calcium alloy (CaSi) is widely used in steel metallurgy for deoxidation, desulfurization, denitrification, and alloying, thanks to the strong affinity of calcium and silicon for oxygen, sulfur, and nitrogen. The alloy is classified based on calcium content, such as SiCa31 and SiCa28. Additionally, multi-element alloys like Si-Ca-Al, Si-Ca-Mn, and Si-Ca-Fe can be created by adding other elements to the silicon-calcium alloy.

  • Calcium Silicon Ca1 (CaSi31):
    1. Calcium content: 31%
    2. Total content of calcium and silicon: at least 90%
  • Calcium Silicon Ca2 (CaSi28):
    1. Calcium content: 28%
    2. Total content of calcium and silicon: at least 85%
ca-si alloy
Nodulizer case

CaSi1 Traditional Production Methods

Currently, the industrial production of CaSi1 primarily involves carbothermal reduction at approximately 2000°C. The chemical reaction is as follows:

CaO+SiO2​+3C→CaSi+3CO

However, this method has several drawbacks:

  1. Slag Formation: At high temperatures, lime and silica first form low-melting calcium silicate slag, hindering the carbothermal reduction reaction.
  2. Loss of Calcium and Silicon: Due to the low boiling point of calcium, it volatilizes into calcium vapor, and SiO2 is reduced to SiO gas, resulting in the emission of CO, Ca gas, and SiO gas from the furnace, with about 10% loss of both calcium and silicon.
  3. Low Resource Utilization: To produce one ton of CaSi1 (based on 24% Ca), approximately 2300 kg of silica, 1200 kg of lime, 1100 kg of coke, 180 kg of charcoal, 500 kg of coal, 70 kg of wood, and 200 kg of electrode paste are consumed, along with about 14500 kWh of electricity. Calcium recovery rate is 35%-43%, and silicon recovery rate is 59%-62%.

CaSi1 Innovative Electrolytic Production Process

Using an electrolytic method instead of carbothermal reduction can significantly improve these issues. The new method involves the electrolysis of silica or silicon calcium mixed oxides at lower temperatures, reducing energy consumption and slag formation. The process steps are as follows:

  • Raw Material Preparation: Mix 30-100 wt% silica (SiO2) and/or CaSiO3 powder with 0-70 wt% limestone (CaCO3) and/or quicklime (CaO) to create a porous raw pellet. Sinter the pellet at 700-1200°C.
  • Electrolysis:
    1. Place the sintered pellet in a metal basket (cathode) and immerse it in molten calcium chloride at 800-950°C.
    2. Use graphite or inert materials as the anode for electrolysis. During electrolysis, electrochemical reduction of silica and lime occurs at the cathode, producing silicon-calcium compounds.
    3. Calcium ions in the molten salt deposit on the cathode and combine with silicon to form CaSi1.
    4. After electrolysis, replace the cathode basket to enable continuous production.
  • Vacuum Smelting: Subject the electrolysis product to vacuum smelting to separate it from the molten salt, which can be recycled.
  • Control Parameters:
    1. Use constant current or constant voltage electrolysis, with current density at 0.2-1.0 A/g of solid cathode material and cell voltage between 3-5V.
    2. Optionally add 0-20 mol% CaO to the molten calcium chloride to adjust calcium content.

CaSi1 Advantages and Features

The new method offers several advantages:

  1. Low-Temperature Operation: Operating temperature reduced to 800-950°C, significantly lowering energy consumption.
  2. High Purity and Adjustability: High product purity with adjustable calcium content between 5-80 wt%.
  3. Environmental Benefits: No slag formation, reduced carbon resource consumption, and minimal greenhouse gas emissions.
  4. Efficient Production: High current efficiency, easy to achieve continuous production, and significantly lower energy consumption and costs.

The innovative electrolytic method combines solid-state reduction and electrodeposition to produce silicon calcium alloys, featuring low operating temperatures, inexpensive and readily available raw materials, high product purity, adjustable calcium content, and environmentally friendly production. This method is a highly efficient and sustainable approach to producing CaSi1.