A Leading Ferro Alloy Manufacturer

Use and Development of Nodulizers in Cast Iron

Home » News » Use and Development of Nodulizers in Cast Iron
Ferro Silicon Magnesium Nodulizer

Share

Nodulizers are metals or alloys added to molten iron during the casting process to produce nodular graphite cast iron. They help transform the graphite in cast iron into a spherical shape, enhancing the material’s properties. There are various types of nodulizers, and different countries have different requirements for their foundries. In China, the most commonly used nodulizer is ferrosilicon rare earth magnesium alloy, while magnesium-based nodulizers (pure magnesium and magnesium alloys) are widely used abroad, and a few countries utilize calcium-based nodulizers.

spheroidizing agent

Ferro Silicon Magnesium Nodulizer

Nodulizer case

FeSiMg Nodulizer

Function and Effects of Nodulizers

Nodulizers promote the formation of spherical graphite in cast iron, which significantly improves the strength of ductile iron compared to gray cast iron and provides better toughness than malleable cast iron, while still retaining some advantages of gray cast iron. However, the use of nodulizers may increase the tendency to form “chilled” structures and hardened areas at weld seams, making ductile iron more prone to cracks at welds and heat-affected zones (especially fusion zones) compared to gray cast iron.

Development History of Nodulizers

The evolution of nodulizers has driven the development of ductile iron production. Early nodulizers like cerium could not be used for large-scale industrial production due to resource scarcity and strict requirements for iron composition. The advent of magnesium nodulizers enabled industrial-scale production of ductile iron, and the development of magnesium-nickel, magnesium-copper, and magnesium-ferrosilicon nodulizers further expanded the production of ductile iron.

The widespread use of rare earth magnesium ferrosilicon nodulizers in China has made the production of ductile iron largely reliant on domestic resources, establishing a series of rare earth magnesium ductile irons. This has broadened the use of pig iron, improved the performance and quality of ductile iron castings, and fostered the growth of the industry. The application of heavy rare earths, such as yttrium, has also paved the way for new composite nodulizers. The combined utilization of various nodulizing elements will further advance ductile iron production and performance.

Basic Requirements for Nodulizers in Foundries

  1. High nodulizing ability;
  2. Abundant resources, low cost, and easy to melt;
  3. Strong adaptability to different iron compositions (such as eutecticity, sulfur content, and alloying elements) and temperatures;
  4. Good reaction kinetics with stable reactions, easy removal of reaction products, low dosage, minimal cooling, and effective nodulizing treatment.

Common Types of Nodulizers

  • Magnesium-silicon alloys
  • Rare earth magnesium-silicon alloys(FeSiMg)
  • Calcium-based alloys (mainly used in Japan)
  • Nickel-magnesium alloys
  • Pure magnesium alloys
  • Rare earth alloys

Among these, rare earth magnesium ferrosilicon alloys are the most widely used nodulizers. Calcium-magnesium nodulizers are primarily produced and used in Japan, where magnesium content varies from 4% to 28%, while calcium content remains relatively stable, ranging from 20% to 31%. These alloys exhibit a lower tendency to form chilled structures, but they require higher processing temperatures and produce more slag.

Advantages and Disadvantages of Different Nodulizers

  • Nickel-magnesium alloys: Widely used in the Americas and Europe, these alloys have high relative density, stable reactions, and alloying effects from nickel. However, they are expensive and less commonly used in China.
  • Pure magnesium alloys: Although they have a high absorption rate, their application is limited due to stringent safety requirements.
  • Rare earth alloys: Initially used as nodulizers, but due to high cost, high chilling tendency, and potential graphite distortion at excessive amounts, they are now used mainly as auxiliary nodulizing elements.

National Standards and Selection of Nodulizers in China

China’s national standards for nodulizers include grades 3-8, 5-8, and 7-8. Some foundries may choose lower-cost grades such as 1-6, 2-7, 1-7, or 2-6 to reduce expenses, though these may have slightly lower effectiveness. It is recommended to use nodulizers that meet national standards for better performance, as higher-quality nodulizers typically contain fewer impurities and deliver better casting results.

Anyang Hongshun Metallurgy produces and directly sells casting-grade ferrosilicon magnesium nodulizer. For more information about related products, feel free to call for inquiries.